Over 10,000,000 Carbide Tips & Strips in Stock
Same Day Delivery - Call 1-800-221-5452
Specialists in Industrial Saws & Knives,
Band Saws & Sash Gangs

 

Home

 Products Services

About Sharp

 Contact Us Reference Catalogs

 

Carbide Tips, Strips, Bars, Blanks - Industrial Saws & Knives - Band Saws/Sash Gangs

Inserted Tooth Cut-Off Saw Blades
 
Standard Sizes
Cut-Off Teeth
Ordering Information
 

Inserted tooth saw blades are designed for highly efficient cutting to length of large diameter logs. Heavy gauge and extra tough, these saw blades are well suited to the single saw Mobile Slasher and mul­tiple- saw Deck Slashers found in today's paper mills. They are also the ideal blade for use on Merchandiser Machines used in modern lumber, plywood, particle board and wafer board mill complexes. The replaceable teeth are easily changed and can be resharpened, simplifying maintenance while maintaining original saw diameter. Inserted toothsaws are Laser Cut and Precision Milled on "State of the Art" CAD/CAM machinery.

This insures that the V grooved sockets make a Mechanically Perfect Fit Between Plate and Tooth consistently insuring tight fitting teeth. The replaceable machined alloy steel teeth are held securely by wear resistant rivets. These saw plates are made of high quality alloy steel, heat treated in modern equipment to insure maximum hard­ness and toughness. This results in extended saw life and tension holding qualities.
 

ORDERING INFORMATION NEEDED:

Quantity
Diameter
Gauge
Centerhole
No. of Teeth
Tooth Style
Pin Holes
R.P.M.

IMPORTANT

Also include Standard tooth shoulder design.

Click here to see tooth shoulder designs

Standard Sizes

 

Diameter

Carbide Tipped Future 2000

Carbide Tipped Timber Tooth

 Hammer Set 4,44, M Hammer Set Jumbo
  Gauge # of Teeth Gauge # of Teeth Gauge # of Teeth Gauge # of Teeth
40" 2,3 30 2, 3, 4 40 3,4,5 50    
42" 2,3 30 2, 3, 4 40 3, 4, 5 50    
44" 2,3 30 2, 3, 4 40 3, 4, 5 50    
46" 2,3 32 2,3,4 42 3, 4, 5 52    
48" 2,3 32 2, 3, 4 42 3, 4, 5 52    
50" 2,3 32 2, 3, 4 42 3, 4, 5 52    
52” 2,3 34 2, 3, 4 44 3, 4, 5 54    
54" 2,3 34 2, 3, 4 44 3, 4, 5 54    
56" 2,3 34 2, 3, 4 44 3, 4, 5 54    
58” 2,3 36 2, 3, 4 46 3,4,5 56    
60” 2,3 36 2, 3, 4 46 3, 4, 5 66    
66” 2,3 42 2, 3,4 52 3, 4 72    
72" 2,3 50 2, 3 60 3, 4 80 2, 3 80
84" 2,3 60 2, 3 70 3, 4 96 2, 3 96
96" 2,3 70 2, 3 80     2, 3 120

NOTE: Saws are NOT taper ground

When Ordering Gauge, See the Following Tooth Gauges Available:

Future-2000™, Jumbo & 2-1/2 2/3 gauge
Timber Tooth™ Jumbo 2/3 gauge
Timber Tooth™ #44 3/4 gauge
Hammerset #4 4 gauge
Hammerset #44 4,5 gauge
Hammerset M 3 gauge
Hammerset Jumbo 2/3 gauge

Back to Top of Page

Cut-Off Teeth

Cutoff teeth are made of high quality alloy steel precisely heat treated to provide excellent shock and wear resistance. All teeth are precision milled to insure a consistently perfect fit in our saw plates.
 

FUTURE-2000™ (Carbide Tipped)

Future-2000™ cut-off tooth features the most advanced cutting technology. The innovative, double pointed, carbide tips cut freer and track better than left and right hand teeth. Center Tracking significantly reduces crack causing vibration and the teeth stay tighter in the saw. The double pointed carbide tips actually shear wood fibers instead of tearing them. The self-aligning tips can be brazed onto the teeth without removing the teeth from the saw. The Future- 2000™ eliminates the need for left and right hand teeth.

Packaged 100/box

Back to Top of Page

Important Ordering Information

Always refer to the following Standard Tooth Shoulder Designs when ordering.

 Tooth Shoulder Designs for Jumbo, M and #44 Hammerset Only

SSP-10 SSO-0 SSN-5

 

SSP-10
SSO-0
SSN-5

Set Positive
Set Zero
Set Negative

10° Positive Hook
0° Hook
5° Negative Hook

 

Tooth Shoulder Designs for #44 Timber Tooth™  Carbide Tipped Only

SCP-10 SCO-0 SCN-5

 

SCP-10
SCO-0
SCN-5

Carbide Positive
Carbide Zero
Carbide Negative

10° Positive Hook
0° Hook
5° Negative Hook

 

Tooth Shoulder Designs for Jumbo Timbertooth™ and Future-2000™ Carbide Tipped Only

SCP-G-10 SCO-G-0 SCN-G-5

 

SCP-G-10
SCO-G-0
SCN-G-5

Carbide Positive Gullet
Carbide Zero Gullet
Carbide Negative Gullet

10° Positive Hook
0° Hook
5° Negative Hook

 

Tooth Shoulder Designs for #4 Hammerset or Offset Only

SS-4

 

SS-4

Set #4

13° Positive Hook

 

Tooth Shoulder Design for 2-1/2 Future-2000™ Hammerset or Offset Only

2-1/2 Carbide C.O.

 

0° Hook

 

Special Notes

Hook Angles:
10° Positive - Recommended when saw arbor is below the log.
0° and 5° Negative - Recommended when saw arbor is above the log.
0° - Generally used on swing or chop saws.
5° Negative - Generally used on stationary saw arbors above the log deck.

Back to Top of Page

 

Home  -  Products  -  Services  -  About Sharp  -  Contact Us  -  Reference - Catalogs

The Sharp Tool Co., Inc. , 7 Bonazzoli Ave. , Hudson, MA 01749
800-221-5452 / Local: 978-568-9292 / Fax: 978-568-9497 / E-mail: sharp@sharptool.com