Over
10,000,000 Carbide Tips & Strips in Stock
Same Day Delivery -
Call 1-800-221-5452
Specialists in
Industrial Saws & Knives,
Band Saws & Sash Gangs
|
|
Over
10,000,000 Carbide Tips & Strips in Stock |
| Products | Services | Contact Us | Reference | Catalogs |
|
Carbide Tips, Strips, Bars, Blanks - Industrial Saws & Knives - Band Saws/Sash Gangs |
CUT-OFF SAW BLADES
| These popular saw blades are designed for cutting across the grain recommended for cutting-off or trimming all varieties of hard or soft wood. Diameters may range from 6" to 84". The best choice for tooth style is determined by the location of the saw arbor on the machine: if it is ABOVE the table use the style "M" tooth; if it is BELOW the table use the style "L' tooth. Teeth are set and filed for clearance. Saw blades listed are most popular and are carried in stock for immediate delivery. |
| Dia. | Thick (gauge) | Center Hole | Teeth | Tooth Style | Kerf. |
| 12 | 14 | 1 | 100 | L, M | 0.148 |
| 14 | 13 | 1 | 100 | L, M | 0.148 |
| 14 | 14 | 1 | 100 | L, M | 0.148 |
| 16 | 13 | 1 | 100 | L, M | 0.148 |
| 16 | 14 | 1 | 100 | L, M | 0.134 |
| 18 | 13 | 1 | 100 | L, M | 0.148 |
| 20 | 10 | 1 | 100 | L, M | 0.203 |
HOLLOW GROUND SMOOTH TRIMMER SAW BLADES (Style P)
| Expertly engineered to cut-off and trim soft wood with exceptional smoothness and without splinters, these saws are particularly well suited to smooth-end trimming in saw mills. Hollow ground for clearance. they are furnished with tooth Style P with 45° alternate face bevel. The teeth act like small knives which actually plane the cut while trimming the board to length. These saws can be used on power feed and multiple saw automatics or two-saw trimmers as well as for hand feed trimming on table, swing saw or straight line cut-off machines. |
| Diameter | Gauge | No. of Teeth |
| 12 | 12-15-12 | 150 |
| 14 | 11-15-11 | 150 |
| 16 | 10-14-10 | 150 |
| 18 | 8-12-8 | 150 |
| 20 | 7-11-7 | 100 through 160 |
| 22 | 7-11-7 | 100 through 180 |
| 26 | 7-11-7 | 150 through 200 |
| 28 | 6-10-6 | 150 through 200 |
HOLLOW GROUND PLANER COMBINATION SAW BLADES
| This blade has been developed and perfected for very fast and remarkably smooth cutting in any direction of the wood. It is the outstanding choice for hand feed operations where a smooth cutting combination saw is required. Its Style S tooth has extra hook to take a fast feed. Its special hollow grind provides plenty of clearance for free and easy passage through the work without collecting gum or burning. The result is more cuts between sharpenings; cuts that are so smooth that sanding can be eliminated |
| Dia. | Thick (gauge) | Center Hole | Teeth | Tooth Style |
| 10 | 13-16-13 | 5/8 | 70 | S |
| 12 | 12-15-12 | 1 | 90 | S |
| 14 | 11-14-11 | 1 | 100 | S |
| 16 | 11-14-11 | 1 | 110 | S |
HOLLOW GROUND MITRE, PLYWOOD AND CUT-OFF SAW BLADES
| Used principally for mitering and cutting off light stock such as in cabinet and cigar box work, these blades leave a smooth, finished surface that does not require sanding. They are not recommended for heavy cutting. Hollow ground for clearance, these blades are generally furnished with style L tooth but are available with style M tooth made to order. For power feed trimming of hardwood flooring, these blades can be recommended when made to order 1 or 2 gauges thicker than the stock sizes listed. For example, the 12" blade should be ordered 1 1-14-11 gauge instead of 13-16-13 gauge. |
| Dia. | Thick (gauge) | Center Hole | Teeth | Tooth Style | Collar |
| 8 | 15-18-15 | 5/8” | 150 | L, M | 3-1/2" |
| 10 | 14-17-14 | 5/8” | 150 | L, M | 4" |
| 12 | 13-16-13 | 1” | 150 | L, M | 5" |
REMANUFACTURING RIP SAW BLADES
| These blades are widely used in lumber mills, maintenance shops, and woodworking plants manufacturing such products as furniture. Generally under 30 inches in diameter, furnished with Style A teeth, set and filed for clearance, they can be used on table saws, edger saws or in single or gang ripping applications, cutting boards or dimension lumber. |
| Dia. | Thick (gauge) | Center Hole | Teeth | Tooth Style | Kerf |
| 14 | 12 | 1 | 36 | A | 0.165 |
| 14 | 14 | 1 | 36 | A | 0.134 |
| 16 | 13 | 1 | 36 | A | 0.148 |
| 16 | 14 | 1 | 36 | A | 0.134 |
| 18 | 12 | 1 | 36 | A | 0.165 |
| 20 | 13 | 1 | 36 | A | 0.148 |
| Alteration of Stock Items: Arbor holes can be altered at an additional cost when specified. | |||||
|
Home - Products - Services - About Sharp - Contact Us - Reference - Catalogs |
|
The Sharp Tool Co., Inc.
, 7 Bonazzoli Ave.
, Hudson, MA 01749 |