Sharp Tool's carbide rods are used for various cutting
applications including cutting aluminum allow, stainless steel, cast iron,
refractory steel, nickel alloys, titanium and other nonferrous metals. For
carbide rods, there are a variety of grades depending on the application.
Available in all major grades. Micro Grain, Sub Micro Grain etc.
Available with Coolant Holes per request.
Available with Chamfer / No Chamfer
Carbide Rods
.220 x 3
.234375 x 3-1/4
.250 x 1-1/2
.250 x 1-1/2 w/ch
.250 x 2
.250 x 2 w/ch
.250 x 2-1/2
.250 x 2-1/2 w/ch
.250 x 3
.250 x 3 w/ch
.250 x 3-1/4 w/ch
.250 x 3-1/2
.250 x 4
.250 x 4 w/ch
.250 x 6
.365625 x 3-1/2
.28125 x 3-1/2
.296875 x 3-3/4
.3125 x 1-1/4
.3125 x 2
.3125 x 2 w/ch
.3125 x 2-1/2
.3125 x 2-1/2 w/ch
.3125 x 2-3/4
.3125 x 3
.3125 x 3 w/ch
.3125 x 3-3/4
.3125 x 4
.3125 x w/ch
.3125 x 6
.3125 x 6 w/ch
.3189 x 3-3/4
.328125 x 4
.34375 x 4
.359375 x 4-1/4
Carbide Rods
.375 x 2
.375 x 2 w/ch
.375 x 2-1/2
.375 x 2-1/2 w/ch
.375 x 3
.375 x 3 w/ch
.375 x 3-1/2
.375 x 3-1/2 w/ch
.375 x 4
.375 x 4 w/ch
.375 x 4-1/4
.375 x 6
.3819 x 4-1/4
.390625 x 4-1/2
.421875 x 4-1/2
.4375 x 2-1/2 w/ch
.4375 x 2-3/4
.4375 x 2-3/4 w/ch
.4375 x 4
.4375 x 4-1/2
.4375 x 6
.453125 x 4-3/4
.46875 x 4-3/4
.484375 x 4-3/4
Carbide Rods
.500 x 2
.500 x 2-1/2
.500 x 2-1/2 w/ch
.500 x 3
.500 x 3 w/ch
.500 x 3-1/2
.500 x 3-1/2 w/ch
.500 x 4
.500 x 4 w/ch
.500 x 5 w/ch
.500 x 6
.500 x 6 w/ch
.500 x 7
.500 x 8
.500 x 10
.5625 x 3-1/2
.5625 x 3-1/2 w/ch
.625 x 3 w/ch
.625 x 3-1/2 w/ch
.625 x 4 w/ch
.625 x 5 w/ch
.625 x 6
.625 x 6 w/ch
.625 x 7
.625 x 8
.625 x 10
.750 x 3 w/ch
.750 x 4 w/ch
.750 x 5 w/ch
.750 x 6 w/ch
.750 x 7
.750 x 8
.750 x 10
Carbide Rods
.875 x 4
.875 x 6
1.00 x 4 w/ch
1.00 x 4-1/2
1.00 x 4-1/2 w/ch
1.00 x 5 w/ch
1.00 x 6
1.00 x 6 w/ch
1.00 x 7
1.00 x 8
1.00 x 10
1.250 x 4
1.250 x 6
Other Sizes Available
